Stock Dies
Standard tools are on hand for over 70,000 sizes of flat washers. There is a good chance that we will have a size to fit your exact need. If not, we can make a part to your exact specifications.
The following components are available to make your part:
Inside Diameters |
Outside Diameters |
Up to 2" |
every 1/64" |
Up to 2" |
every 1/64" |
and in screw sizes No. 2 thru 14 |
Over 2" to 4" |
every 1/16" |
Over 2" to 4" |
every 1/16" |
Over 4" to 6" |
every 1/8" |
Over 4" to 6" |
every 1/8" |
Over 6" to 8" |
every 1/4" |
Over 6" to 8" |
every 1/4" |
|
|
Tolerances on Special Washers
| Inside Diameters |
Outside Diameters |
Up to 1" |
— |
+.003-.000 |
Up to 1" |
+.000-.003 |
Over 1" to 2" |
— |
+.005-.000 |
Over 1" to 2" |
+.000-.005 |
Over 2" to 3" |
— |
+.008-.000 |
Over 2" to 3" |
+.000-.008 |
Over 3" |
— |
+1/64"- 1/64" |
Over 3" |
+1/64"- 1/64" |
|
